Wall Mount Server Cabinet — 6U and 12U, 450/600 mm Deep
Compact 6U–18U wall-mount cabinets for switches, patching and edge equipment, with lockable glass or steel doors.
A wall mount rack provides 6U to 18U of 19-inch mounting space in a 600 mm wide, 450 mm or 600 mm deep frame. Typical load is 60 kg to 100 kg with four anchors, and the bottom should sit about 1,200 mm above the floor.
Last reviewed: 2026-11-07
Wall cabinets are used where floor space is unavailable: floor distribution points, retail back rooms, clinics and small CCTV sites.
The cabinet can be single-section or double-section for rear access. Cable entries are provided at top and bottom; fans, shelves and PDUs are optional.
Best for
- Floor distribution and small network rooms
- Retail, clinic and branch back rooms
- CCTV and access-control edge sites
Key specifications
Wall mount rack reference
| Height | Width | Depth | Typical use |
|---|---|---|---|
| 6U | 600 mm | 450 / 600 mm | Small switch cabinet |
| 9U–12U | 600 mm | 450 / 600 mm | Floor distribution |
| 15U–18U | 600 mm | 600 mm | Edge and CCTV sites |
How to choose
Check the wall
Confirm the wall can carry the cabinet plus equipment; use a spreader plate for lightweight partitions.
Measure device depth
Leave cable bend space behind the switch; 450 mm suits shallow devices, 600 mm suits deeper units.
Plan cooling
Use a fan or ventilated door when active switches or a small UPS are installed.
Frequently asked questions
03 Q&A Can a wall cabinet open from the rear?
What load can a wall cabinet carry?
Is a fan required?
Related pages
Send us your rack schedule or floor plan
Share cabinet quantities, U heights, power loads and the destination port. Our engineering team will confirm the configuration, drawing and production lead time.
Request a quotation