Electrical Enclosures
Enclosure Accessories
Mounting plates, fans, filters, plinths and enclosure accessories.
Quick answer
Enclosure accessories include mounting plates, fan trays, filters, plinths, shelves and cable managers. They fit 600 mm and 800 mm cabinets, support 1U to 4U equipment, and are selected by cabinet model and project requirement.
Last reviewed: 2026-11-07
RackSource supplies mounting plates, fan and filter units, plinths, castors, locks and cable-entry accessories for its enclosure ranges.
Accessories are matched to the enclosure series and project requirements; custom plates and cut-outs can be supplied.
Key configurations
- —Enclosure accessory, project fit
- —Enclosure accessory, project fit
- —Enclosure accessory, project fit
Industry reference
Enclosure accessory reference
| Accessory | Function | Typical use |
|---|---|---|
| Mounting plate | Component mounting | Electrical panels |
| Fan / filter | Ventilation and dust control | Indoor enclosures |
| Plinth / castors | Fixed or mobile installation | Floor cabinets |
| Gland plate | Cable entry sealing | Outdoor/industrial |
Cooling accessory selection
| Heat load | Accessory | Typical use |
|---|---|---|
| Low | Passive vents | Small enclosures |
| Medium | Fan / filter | General enclosures |
| High | Heat exchanger / AC | Sealed or outdoor |
Models in this series
| Image | Model | Name | Configuration | View |
|---|---|---|---|---|
 | SP-T300 | SP-T300 Accessory | Enclosure accessory, project fit | Get a Quote → |
 | SP-F300 | SP-F300 Accessory | Enclosure accessory, project fit | Get a Quote → |
 | SP-U300-C | SP-U300-C Accessory | Enclosure accessory, project fit | Get a Quote → |
Typical applications
- 01 Enclosure cooling and ventilation
- 02 Mounting and cable management
- 03 Outdoor and industrial enclosures
Questions buyers ask
03 Q&A Are accessories compatible with all enclosures?
Compatibility depends on the enclosure series and size; the model and drawing should be confirmed before ordering.
Can fan and filter units be retrofitted?
Yes, where the enclosure wall has sufficient space and the cut-out is made to the accessory drawing.
Are custom plates available?
Custom mounting plates and cut-outs are available from a drawing.
Other series from this brand
Start a project
Send us your rack schedule or floor plan
Share cabinet quantities, U heights, power loads and the destination port. Our engineering team will confirm the configuration, drawing and production lead time.
Request a quotation